SHRINK WRAPPERS

Machines by Brand

Home > SHRINK WRAPPERS

Sort By:

Page of 2

SmiPack S560

Smipack S560

Sealing and shrinking in one operation

PTFE-coated sealing blade

Air cooling of the machine frame

Height adjustment of the internal packaging plate

Mobile product-holding plate, loose from the film reel support to allow a better adjustment of the film to the pack size

Hood hold-down electromagnet

Automatic hood release

Flextron® control system equipped with:

alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays, that allow a simple and precise control of all the machine operations, such as:
machine status
number of packs produced by an electronic pack counter
adjustment of the sealing temperature
adjustment of the hood opening delay
adjustment of the shrinking delay
adjustment of the shrinking time
adjustment of the shrinking chamber temperature
possibility of scheduling up to 10 different work cycles, thus resulting in increased productivity and simplified use
troubleshooting

modular power section, separated from the control panel and characterized by:

longer-lasting solid state relays providing easier maintenance
in case of failure, possibility of replacing just the damaged module, without losing the data stored in the memory

Reduced power consumption

Compliance with CE regulations

Smipack SL45

Sealing and shrinking in one operation

PTFE-coated sealing blade

Height adjustment of the internal packaging plate

Mobile product-holding plate, loose from the film reel support to allow a better adjustment of the film to the pack size

Hood hold-down electromagnet

Automatic hood release

Air cooling of the machine frame

Alphanumeric LCD control panel equipped with 6 storable work programs and a 16-bit microprocessor card, that allows a simple and precise control of all the machine operations, such as:

machine status
number of packs produced by an electronic pack counter
adjustment of the sealing temperature
adjustment of the shrinking time
adjustment of the shrinking chamber temperature
adjustment of the shrinking delay
adjustment of the hood opening delay
troubleshooting

Long-lasting solid state relays providing easier maintenance

Reduced power consumption

Compliance with CE regulation

Technical data - SL 45
Power supply *	220 - 240 V
	1PH - N - PE
	50/60 Hz
Installed power	1650 W
Sealing bar	440 X 300 mm
Maximum pack height	210 mm
Average output per hour	up to 300 pph **
Maximum size of film reel	450 - ø 250 mm
Machine size with supports	1070 x 665 h 1015 mm
Machine size with stand	1050 x 665 h 1029 mm
Machine / supports / stand, net weight	60 / 11 /15 Kg
Usable Films: Pvc, Polyolefins	up to 30 µ

(**) the stated speed can change according to the product size and the pack collation.

Smipack SL55

Sealing and shrinking in one operation

PTFE-coated sealing blade

Height adjustment of the internal packaging plate

Mobile product-holding plate, loose from the film reel support to allow a better adjustment of the film to the pack size

Hood hold-down electromagnet

Automatic hood release

Air cooling of the machine frame

Alphanumeric LCD control panel equipped with 6 storable work programs and a 16-bit microprocessor card, that allows a simple and precise control of all the machine operations, such as:

machine status
number of packs produced by an electronic pack counter
adjustment of the sealing temperature
adjustment of the shrinking time
adjustment of the shrinking chamber temperature
adjustment of the shrinking delay
adjustment of the hood opening delay
troubleshooting

Long-lasting solid state relays providing easier maintenance

Reduced power consumption

Compliance with CE regulation

Technical data - SL 55
Power supply *	220 - 240 V
	1PH - N - PE
	50/60 Hz
Installed power	3700 W
Sealing bar	560 x 430 mm
Maximum pack height	260 mm
Average output per hour	up to 300 pph **
Maximum size of film reel	600 - ø 250 mm
Machine size with supports	1260 x 805 h 1100 mm
Machine size with stand	1240 x 805 h 1102 mm
Machine / supports / stand, net weight	77 / 11 / 18 Kg
Usable Films: Pvc, Polyolefins	up to 30 µ

(**) the stated speed can change according to the product size and the pack collation.

LP Semi Automatic SA

TYPE OF MACHINE
Semi-automatic shrink wrapper with manual loading

WRAPPING METHOD AND MATERIAL
Double reel with polyethylene film - flat leaf (LDPE)

Shrink wrapper with manual loading system, suitable for small and medium productions where it's often required to change package sizes and shapes (single units or multipacks).
Possibility to achieve total closure of the pack by film overlapping
Besides the monoblock version, it's possible to supply wrapping unit and separate shrink tunnel

MODEL	SFE400 SA	SFE600 SA	SFE800 SA	SFE1100 SA	SFE1500 SA

(B) (A)

MAX. PACKAGE HEIGHT (mm)**	250	320	350	400	350	600

SEALING BAR WIDTH (mm)	390	560	760	1070	1470

MAXIMUM SIZE OF FILM REEL (mm)**	320	500	700	1000	1400

PRODUCTION SPEED (packages/min)	15	15	15	15	15

INSTALLED POWER (kW)*	8,8	8,8	17,4	22,2	29,5	34,8

* tension 400V 50Hz
** the maximum dimensions are indicative and they can change depending on the package characteristics

For all of the above machines various versions are available, depending on different product dimensions and higher production speeds

Standard equipment:

Motorized upper and lower film unwinding
Sealing station
Hold down press for product stabilisation during wrapping phase
Fast cooling sealing
Shrink tunnel with mesh conveyor belt with adjustable speed controlled by inverter
Pack cooling fan at the outlet

Optional:

Tamping rollers at the outlet

LP Automatic NF

TYPE OF MACHINE
Automatic shrink wrapper with in-line feeding belt

WRAPPING METHOD AND MATERIAL
Double reel with polyethylene film - flat leaf (LDPE)

Shrink wrapper with in-line motorized feeding belt.
Suitable for single products and also for packages of big dimensions without any length limitations.
Possibility to achieve total closure of the pack by film overlapping or with an additional lateral sealing station (optional).
Besides the monoblock version, it's possible to supply wrapping unit and separate shrink tunnel.

MODEL	SFE400 NF	SFE600 NF	SFE800 NF	SFE1100 NF	SFE1500 NF

(B) (A)

MAX. PACKAGE HEIGHT (mm)**	250	320	350	400	350	600

SEALING BAR WIDTH (mm)	390	560	760	1070	1470

MAXIMUM SIZE OF FILM REEL (mm)**	320	500	700	1000	1400

PRODUCTION SPEED (m/min)	4-8	4-8	4-8	4-8	4-8

INSTALLED POWER (kW)*	8,8	8,8	17,4	22,2	29,5	34,8

* tension 400V 50Hz
** the maximum dimensions are indicative and they can change depending on the package characteristics

For all of the above machines various versions are available, depending on different product dimensions and higher production speeds

Standard equipment:

In-feed conveyor with adjustable speed controlled by inverter
Motorized upper and lower film unwinding
Sealing station
Fast cooling sealing
Shrink tunnel with mesh conveyor belt with adjustable speed controlled by inverter
Pack cooling fan at the outlet

Optional:

Hold down press for product stabilisation during wrapping phase
Lateral sealing station for total closing
Tamping rollers at the outlet
Device for short/light products
Additional film holders (motorized or not)

LP Automatic 90 AU

TYPE OF MACHINE
Automatic shrink wrapper with 90° feeding belt

WRAPPING METHOD AND MATERIAL
Double reel with polyethylene film - flat leaf (LDPE)

Shrink wrapper with 90° motorized feeding belt
Suitable to be integrated in fully automatic lines where it's necessary to create packs composed by multi-rows and/or multi-layers
Possibility to achieve total closure of the pack by film overlapping
Besides the monoblock version, it's possible to supply wrapping unit and separate shrink tunnel

MODEL	SFE400 AU	SFE600 AU	SFE800 AU	SFE1100 AU	SFE1500 AU

(B) (A)

MAX. PACKAGE HEIGHT (mm)**	250	320	350	400	350	600

SEALING BAR WIDTH (mm)	390	560	760	1070	1470

MAXIMUM SIZE OF FILM REEL (mm)**	320	500	700	1000	1400

PRODUCTION SPEED (packages/min)	18	18	18	18	18

INSTALLED POWER (kW)*	8,8	8,8	17,4	22,2	29,5	34,8

* tension 400V 50Hz
** the maximum dimensions are indicative and they can change depending on the package characteristics

For all the above machines various versions are available, depending on different product dimensions and higher production speeds

Standard equipment:

In-feed conveyor with adjustable speed controlled by inverter
Product gate separation system
Automatic pack collation controlled by PLC
Motorized upper and lower film unwinding
Sealing station
Hold down press for product stabilisation during wrapping phase
Fast cooling sealing
Shrink tunnel with mesh conveyor belt with adjustable speed controlled by inverter
Pack cooling fan at the outlet

Optional:

Electronic version (electronic pack pusher operated by servo drive) for high speed production, up to 25 packs/min
Duplex version (double pusher and double motorized upper and lower film unwinding)
Automatic flat pad insertion device
Multi-lanes infeed
Stacker device
Tamping rollers at the outlet
Additional film holders (motorized or not)

LP Automatic multi lanes CAT/CAR

LP Auotmatic Multi Lanes CAT/CAR

TYPE OF MACHINE
Automatic shrink wrapper with multi-lanes feeding belt (in-line)

WRAPPING METHOD AND MATERIAL
Double reel with polyethylene film - flat leaf (LDPE)

Shrink wrapper with multi-lanes infeed belt (in-line) and fly bar pusher mechanism. Suitable to be integrated in high speed production lines where it's necessary to create packs composed by multi-rows
Possibility to create packs with flat pad and/or tray
CAT version for round shaped products: infeed belt equipped by an oscillator
CAR version for rectangular/square shaped products: in-feed belt equipped by a diverter

MODEL	SFE800 CAT/CAR	SFE1100 CAT/CAR	SFE1500 CAT/CAR

(B) (A)

MAX. PACKAGE HEIGHT (mm)**	350	400	350	600

SEALING BAR WIDTH (mm)	760	1070	1470

MAXIMUM SIZE OF FILM REEL (mm)**	700	1000	1400

PRODUCTION SPEED (packages/min)	22	22	22

INSTALLED POWER (kW)*	19,2	28,8	29,5	34,8

* tension 400V 50Hz
** the maximum dimensions are indicative and they can change depending on the package characteristics

For all of the above machines various versions are available, depending on different product dimensions and higher production speeds

Standard equipment:

Multi-lanes infeed conveyor belt with adjustable speed controlled by inverter
Alternating separation system through fly bar pusher mechanism
Product gate separation system
Motorized upper and lower film unwinding
Sealing station
Hold down press for product stabilisation during wrapping phase
Fast cooling sealing
Shrink tunnel with mesh conveyor belt with adjustable speed controlled by inverter
Pack cooling fan at the outlet

Optional:

Motorized sealing bar (up to 25 cycles/min)
Duplex version (double pusher and double motorized upper and lower film unwinding)
Automatic flat pad insertion device
Tray forming version
Tamping rollers at the outlet
Additional film holders (motorized or not)

Smipack FP560

Technical data - FP560
Power supply	220 - 240 V
	1PH - N - PE
	50/60 Hz
Installed power	2450 W
Sealing bar	560 x 430 mm
Maximum pack height	230 mm
Average output per hour	up to 800 pph **
Maximum size of film reel	600 - ø 300 mm
Machine size	2010 x 790 mm
Machine size	h 1050 mm
Machine net weight	129 Kg
Usable Films: Pvc, Polyolefins and Polyethylene	up to 50 µ

(**) the stated speed can change according to the product size, the pack collation and the type of film used

Advantages - FP560

Manual sealing system
Double hood hold-down electromagnet, that highly reduces the pressure of the operator on the sealing arm so as to ensure a better sealing
Pack deviation device
PTFE-coated sealing blade
Closed-circuit liquid cooling of the sealing bars
Viewer of the coolant level
Working height of the sealer and of the tunnel adjustable by means of an external crank
Mobile product-holding plate, loose from the film reel support to allow a better adjustment of the film to the pack size
Emergency button
Automatic pack discharge by means of a motorized conveyor
Flextron® control system equipped with:
- alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays
- modular power section, separated from the control panel and characterized by:
  - longer-lasting solid state relays providing easier maintenance
  - in case of failure, possibility of replacing just the damaged module, without losing the data stored in the memory
Reduced power consumption
Compliance with CE regulations

Smipack FP560A

Technical data - FP560A
Power supply	220 - 240 V
	1PH - N - PE
	50/60 Hz
Installed power	2500 W
Sealing bar	560 x 430 mm
Maximum pack height	230 mm
Average output per hour	up to 1500 pph **
Maximum size of film reel	600 - ø 300 mm
Machine size	2010 x 790 mm
Machine size	h 1050 mm
Machine net weight	145 Kg
Usable Films: Pvc, Polyolefins and Polyethylene	up to 50 µ

(**) the stated speed can change according to the product size, the pack collation and the type of film used

Advantages - FP560A

Continuous cycle sealing
Pack deviation device
Film waste winding device as standard supply
PTFE-coated sealing blade
Closed-circuit liquid cooling of the sealing bars
Viewer of the coolant level
Working height of the sealer and of the tunnel adjustable by means of an external crank
Mobile product-holding plate, loose from the film reel support to allow a better adjustment of the film to the pack size
Emergency button
Automatic pack discharge by means of a motorized conveyor
Flextron® control system equipped with:
- alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays
- modular power section, separated from the control panel and characterized by:
  - longer-lasting solid state relays providing easier maintenance
  - in case of failure, possibility of replacing just the damaged module, without losing the data stored in the memory
This system allows a simple and precise control of all the machine operations, such as:
- machine status
- number of packs produced by an electronic pack counter
- real-time production
- adjustment of the sealing temperature
- pack discharge speed
- automatic hood closing and re-opening, motorized and managed by Inverter
- delay in the opening of the sealing arm
- sealing arm safety device
- possibility of scheduling up to 10 different work cycles, thus resulting in increased productivity and simplified use
- troubleshooting
Reduced power consumption
Compliance with CE regulations

MiniPack FC76

Minipack FC76

Description

FC LINE: FC76
IDEAS MUST GO ON

Minipack-Torre S.P.A. was born more than 30 years ago thanks to the idea of a compact shrinking machine. The idea was patented in 1976 and, since then, has been a success.
However ideas cannot be stopped and today the company is launching a new line which is the result of many years of experience. This represents the summa of the compact machines by Minipack-Torre: easy to use, solid and reliable.
The FC LINE has a fresh design and solid structure, an electronic of new generation, and several other technical improvements which improve even more the performances of these machines.
Every idea by Minipack-Torre is always unique!

NEW LOOK

steel body, new-looking trolley: solidity and accessibility.

NEW ERGONOMIC FEATURES

frontal control interface: intuitive programming, larger packaging area.

NEW TECHNICAL FEATURES

sealing bar liquid cooling system: excellent and more durable sealing
immediate stop of shrinking fan at the end of the cycle: less heat dispersion, more energy saving, more benefit for the user
innovative fixing of the plexi-glass hood: easier maintenance and higher stability
safety control on sealing blades: safer machine
roll support with bigger diameter (250 mm): useful with the micro-perforated film used for bread packaging
packaging plate separated from the roll support: suitable for the packaging of very small products with the same film roll
larger in-feed plate: similar size as the shrink area
innovative micro-perforator: continuous and accurate perforation
new membrane switch electronic board: water-resistant, indipendent from the card and easy-to-use
3-digit display: clear and complete information
10-programs card: programming versatility
couterpiece included: more complete equipment
more powerful fan motor: easier maintenance
safer and higher screened plate: more protection of the heating elements
more powerful fan motor: higher shrinking performance
new die-cast aluminium heating elements with innovative geometry: higher heat exchange, higher efficiency, higher shrinking speed, less comsumption
extra safety thermostat on the heating elements: safer machine
new rubber support: easy to change.

Technical features

Power supply	V	200/230
Phase	ph	1
Power max	kW	3,45
Max output	p/h (pph)	0-300
Useful sealing bars dimensions	mm	540x390
Max product dimensions	mm	500x380x200
Max film roll dimensions (diameter)	mm	250
Max film roll dimensions (width)	mm	600
Working plate height with trolley	mm	925
Machine dimensions with open hood	mm	1260x810x1310
Machine dimensions with closed hood	mm	1260x810x1165
Packed machine dimensions	mm	1330x1080x880
Machine weight (Net/Gross)	kg	90/120
Packed trolley dimensions	mm	1120x642x184
Trolley dimensions	mm	1100x630x480
Trolley weight (Net/Gross)	kg	20/22

Espac....

Machines by Brand

Advantages - FP560

Advantages - FP560A

Description

Technical features